CONAX TECHNOLOGIES HARARDOUS LOCATION CABLE GLAND DISTRIBUTION

Hazardous Location Conduit Seal (HL) - CONTACT US

Sealing Glands > High Performance Insulated Wire Sealing >
Up to 1400°F >

Conax® Technologies’ HL Gland is designed for sealing protection in a wide variety of hazardous environments.

The HL Gland has been CSA® certified in the U.S. and Canada for use in hazardous locations defined by the NEC® as Class I, Div.1 and 2, Groups B, C, and D; Class II, Div. 1 and 2, Groups E, F, and G; and Class III.

The HL Gland is superior to Chico® and other similar conduit sealing compound fittings commonly used in hazardous environments.

With a mechanically-sealed Conax HL Gland, you will not have to be concerned about:

• cracks in compound sealants or incorrectly installed compound sealant that allow gases or liquids to leak in the conduit system,migration of explosive gases through stranded conductors due to a pressure differential in the conduit system.

Features:

• CSA^® certified in the U.S. and Canada
• Pressure rated to 500 psig
• Suitable for gas or liquid
• Features Grafoil^® sealant
• Teflon sleeves are used to protect wires from damage
• Two body styles – small (1/2” NPT) and large (3/4” NPT)
• Body and cap material is 303 SST
• Wire, solid 14, 16 or 18 AWG is supplied either by customer or Conax Technologies
• Minimum 18” leads on both ends
• Wires can be easily assembled in the field
• Temperature range from -4°F to 130° F (-20°C to + 55°C)

 

Teflon® is a registered trademark of E.I DuPont de Nemours Company.
Grafoil® is registered trademark of UCAR Carbon Company.
NEC® is a registered trademark of National Electrical Code.
CSA® is a registered trademark of Canadian Standards Association.
Chico® is a registered trademark of Cooper Crouse-Hinds.

Product Literature